我们在使用干式螺杆真空泵的时候，由于操作失误，会导致螺杆真空泵内进水，对于这种情况，我们一般应该这样解决：
1、如果干式螺杆真空泵内进的水量不多并且在2升以内，停泵时，打开 放油阀，把水放出来，再开启气震阀1小时
如果干式螺杆真空泵内进入大量的水，放干油，再加新油，然后再气震阀1小时
必要的话可以在干式螺杆真空泵的处理室和罗茨真空泵之间安装一个接 收 器，以便液体在没进入螺杆真空泵前就被吸收
2、检查水泵轴的油封环，如磨损严重应更换 新件
螺杆真空泵的管路漏水或漏气，可能安装时螺帽拧得不紧
若渗漏不严重，可在漏气或漏水的地方涂抹水泥，或涂用沥青油拌和的水泥浆
This article is compiled and published by LeyNow vacuum pump. The content is for reference and communication only. If you need to reprint, please indicate the source and retain the original link. Thank you for your support and cooperation.
Technical parameters and application suggestions mentioned in the article should be confirmed in combination with actual working conditions. If you have any questions, please feel free to contact us at Service@LeyNow.com.
Certified as a "Specialized, Refined, Unique and Innovative" SME in Guangdong Province, focusing on the R&D and manufacturing of oil-free vacuum pumps for over ten years.
Possessing a high-quality R&D team and multiple independent intellectual property rights, continuously breaking through vacuum technology bottlenecks.
Many well-known enterprises choose Leynow as their vacuum pump supplier and partner.
7x24 hour fault support, on-site service available in the Pearl River Delta region, and guaranteed original genuine parts.
Please fill in your requirements carefully, and we will contact you within 24 hours.
