真空装置是我们工业生产中比较常用的设备，我们在这里不会谈论它的重要性，由于在使用过程中经常发生损坏，因此我们必须做好真空单元的维护工作
1.泵周围的环境应始终保持清洁干燥
2.应经常检查各部位的润滑情况。 如果发现润滑剂不足，应及时补充。 如果发现润滑油不干净，应及时更换，并应确保在重新拧紧螺栓时将其密封
3.拆卸和修理时，请勿用沉重的锤子敲打每个零件，避免拆下零件并刮伤它们，应特别注意密封表面的平整度和光滑度，否则在重新组装后会导致漏气，从而使泵无法恢复其原始性能
4.拆下的零件应使用汽油，四氯化碳等东西清洗，然后在干燥后组装
5.注意转子两端与左右侧盖之间的间隙，并根据需要调整转子与转子之间以及转子与泵体之间的间隙
6.泵体左右盖之间的连接面用107树脂密封
7.组装真空单元之前，必须注意螺丝套筒的方向。 驱动轴靠近电动机的一侧为**，齿轮箱的一侧为右旋，从动轴的方向相反
This article is compiled and published by LeyNow vacuum pump. The content is for reference and communication only. If you need to reprint, please indicate the source and retain the original link. Thank you for your support and cooperation.
Technical parameters and application suggestions mentioned in the article should be confirmed in combination with actual working conditions. If you have any questions, please feel free to contact us at Service@LeyNow.com.
Certified as a "Specialized, Refined, Unique and Innovative" SME in Guangdong Province, focusing on the R&D and manufacturing of oil-free vacuum pumps for over ten years.
Possessing a high-quality R&D team and multiple independent intellectual property rights, continuously breaking through vacuum technology bottlenecks.
Many well-known enterprises choose Leynow as their vacuum pump supplier and partner.
7x24 hour fault support, on-site service available in the Pearl River Delta region, and guaranteed original genuine parts.
Please fill in your requirements carefully, and we will contact you within 24 hours.
